GeekVape Frenzy Kit



The GeekVape Frenzy kit is exquisitely designed, with both resin and carbon fibre finishes. The pod system is powered by a built-in 950mAh battery with an advanced integrated AS Micro chipset, that permits TC boost mode and precise temperature control to prevent dry heating.

The chipset also features an automatic output matching function, meaning that when the 1.2ohm is inserted, the output will automatically engage temperature control mode. 

The Geekvape Frenzy uses an LED light for easy battery life monitoring. By pressing the fire button twice, the light will glow in different colours:

  • Green for higher than 70%
  • Blue for 31-69%
  • Red for 30% or lower

During charging, the LED will show the colour of the current charge level, red for 0-69% and green for 70-100%, and the green light will stay lit once the battery is fully charged.

The 2ml capacity pod is attached to the battery via a magnetic connection. Replacing the coil on each pod is done via a thread-less cap that needs a quick turn to remove the coil. The pod allows for airflow control adjustment, and refilling the pod is effortless due to a bottom cap which will expose a fill slot when removed. 

The Geekvape Frenzy pod system kit takes the Geekvape NS coils, of which you receive a 0.7 NS mesh and 1.2 NS MTL coil.


  • Size: 86.1mm * 37mm * 15.7mm
  • Material: Zinc Alloy & Resin
  • Battery: Built-In 950mAh Battery
  • E-Juice Capacity: 2ml
  • Output Power: 2.5V 420℉/2.7V 440℉/2.7V 460℉
  • Coil Resistance: 0.7ohm-3ohm
  • Charging Specification: 5V 1A
  • Low Voltage Warning: 3.3V±0.1V
  • PCBA Temperature Alarm: 80℃
  • Maximum Output Duration: 10s
  • Working Temperature:-10~45℃
  • Stand-By Current: Less Than 10uA
  • Charging: MicroUSB Port


  • 1 x Geekvape Frenzy Kit
  • 1 x NS Coil 1.2ohm
  • 1 x NS Mesh Coil 0.7ohm (pre-installed)
  • 1 x USB Cable
  • 1 x User manual